Installing and Removing the Battery
Installing the Battery
Load a fully charged Battery Pack LP-E6 into the camera. The
camera's viewfinder will become bright when a battery is installed,
and darken when the battery is removed.
Only the Battery Pack LP-E6 can be used.
Removing the Battery
26
Open the battery compartment
1
cover.
Slide the lever as shown by the arrow
and open the cover.
Insert the battery.
2
Insert the end with the battery
contacts.
Insert the battery until it locks in
place.
Close the cover.
3
Press the cover to close it.
Open the cover and remove the
battery.
Press the battery release lever as shown
by the arrow and remove the battery.
To prevent short circuiting, be sure to
attach the protective cover to the
battery.