Canon EOS 7D Instruction Manual page 120

Using Wireless FlashN
Fully Automatic Shooting with One External Speedlite
Indoors
Outdoors
120
Approx. 10m
(32.8ft.)
Approx. 7m
(23.0ft.)
Approx.
o
80
5m (16.4ft.)
1
Press the <I> button to pop-up
the built-in flash.
2
Select [Flash control].
3
Select [Built-in flash func. setting].
4 Select [Flash mode].
This shows the most basic setup
for fully-automatic wireless flash
with one Speedlite.
Steps 1 to 3 and 6 to 8 apply to
Approx.
all wireless flash shooting.
7m
Therefore, these steps are
(23.0ft.)
omitted in the other wireless
flash setups explained on the
following pages.
On the menu screens, the <0>
and <1> icons refer to the external
Speedlite, and the <3> and <2>
icons refer to the built-in flash.
For wireless flash, be sure to pop-up
the built-in flash.
Under the [1] tab, select [Flash
control], then press <0>.
Select [Built-in flash func. setting],
then press <0>.
For [Flash mode], select [E-TTL II],
then press <0>.