Canon EOS 7D Instruction Manual page 134

A Live View Shooting
About the Information Display
Each time you press the <B> button, the information display will
change.
Drive mode
White balance
Picture Style
Auto Lighting
Optimizer
Image-recording quality
Flash-ready
AE lock
Shutter speed
Exposure level indicator/
AF mode
•d : Live mode
•c : Face detection Live mode
•f : Quick mode
The histogram can be displayed when [Expo. simulation: Enable] has
been set (p.136).
You can display the electronic level by pressing the <B> button
(p.228). Note that if the AF mode is set to [u Live mode] or the camera
is connected to a TV set with an HDMI cable, the electronic level cannot
be displayed.
When <g> is displayed in white, it indicates that the Live View image
brightness is close to what the captured image will look like.
If <g> is blinking, it indicates that the Live View image is not being
displayed at the suitable brightness due to low or bright light conditions.
However, the actual image recorded will reflect the exposure setting.
If flash is used or bulb is set, the <g> icon and histogram will be
grayed out (for your reference). The histogram might not be properly
displayed in low- or bright-light conditions.
134
Aperture
AEB range
AF point (Quick mode)
Magnifying frame
Histogram
AEB
FEB
Exposure
simulation
Battery check
Highlight tone priority
ISO speed
Shots remaining
Flash exposure compensation