Playback; Daw Remote Control - Yamaha 01V96i Quick Start Manual

✦

Playback

After recording, you can playback to check the audio. Follow the instructions below to check the 2-channel stereo mix on
the 01V96i.
1.
To playback through the 01V96i, you need to patch input
channels to USB on the IN PATCH page. If you assign
USB 1-2 to the input channels 17-18, then you do not
need to re-assign the patch again for recording. (Input
channels 17-18 are patched from ADAT by default)
2.
Open VST Connections in the Device
menu, and confirm if the Output bus
(Stereo Out) is added. Also, make sure
the device ports are assigned to
01V96i 1 and 01V96i 2 respectively.
(If the bus is not added, add the out-
put bus (Stereo) in a similar way to
recording.)
3.
Also, make sure the output port on
each track is assigned to Stereo Out.
4.
Click "Play" to start playback.
✦

DAW Remote Control

The 01V96i's Remote function enables you to control external
DAW, such as Cubase. For the information on how to setup the
01v96i to control Cubase, please refer to P.83 of the 01V96i ref-
erence manual.
3 4
27/32
01V96i Quick Start Guide