Sony Vajo VGC-LT20 Series User Manual page 229

AMD~
iii
CD
IMPORTANT SAFETY INSTRUCTIONS
o
Read Instructions - All the safety and operating instructions should
be read before the product is operated.
o
Retain Instructions - The safety and operating instructions should be
retained for future reference.
o
Heed Warnings - All warnings on the product and the operating
instructions should be adhered to.
o
Compatibility - This option card is for use only with IBM AT or
compatible UL Listed personal computers that have Installation
Instructions detailing user installation of card cage accessories.
o
Grounding - For continued protection against risk of electric shock
and fire, this accessory should be installed only in products equipped
with a three-wire grounding plug, a plug having a third (grounding) pin.
This plug will only fit into a grounding-type power outlet. This is a
safety feature. If you are unable to insert the plug into the outlet,
contact your electrician to replace the obsolete outlet. Do not defeat
the safety purpose of the grounding-type plug.
o
Secure Attachment - All card securement pins shall be completely
tightened as to provide continuous bonding between the option card
and the PC chassis.
o
Lightning - For added protection for this product during a lightning
storm, or when it is left unattended and unused for long periods of
time, unplug it from the wall outlet, and disconnect the antenna or
cable system. This will prevent damage to the product due to lightning
and power-line surges.
o
Power Lines - An outside antenna system should not be located in
the vicinity of overhead power lines or other light or power circuits, or
where it can fall into such power lines or circuits.
o
Antenna Installation - When installing an outside antenna system,
extreme care should be taken to keep from touching such power lines
or circuits, as contact with them may be fatal.
Note: This reminder is provided to call the CATV systems installer's
attention to Section 820.93 of the National Electric Code, ANSI!
NFPA 70:2005 (for US/Canada) and/or EN60728-l1 :2005 standard
(for Europe), which provide guidelines for proper grounding and, in
particular, specify that the coaxial cable shield shall be connected to
the grounding system of the building, as close to the point of cable
entry as practical.