Using The Toshiba Assist Button Or Toshiba Presentation Button8-11 - Toshiba TECRA A8 User Manual

3. Turn the monitor's power on.
4. Turn the computer's power on.
When you turn on the power, the computer automatically recognizes the
monitor and determines whether it is color or monochrome.
However, the Windows Desktop appears on a display device that you used
last time to shut down your computer, if the display device exists when you
turn on the power.
To change the display settings, press Fn + F5. If you disconnect the
external monitor before you turn the computer's power off, be sure to press
Fn + F5 to switch to the internal display. Refer to Chapter 5,
for details on using hot keys to change the display setting.
TV
You can connect a television set to the Video out jack on the computer.
Follow the steps below.
Depending on the model, the Video out jack (TV-out) is not present.
Using the TOSHIBA Assist button or TOSHIBA Presentation
button
1. Connect the TV adaptor cable's S-Video plug to the Video-out jack on
the computer.
2. Connect the TV adaptor cable's S-Video plug to the Video-out jack on
the TV.
3. Press the TOSHIBA Assist button or TOSHIBA Presentation button.
You can use the hot keys Fn + F5 to change the display device. Refer to
Chapter 5,
To open "TOSHIBA Controls" properties, click Start, click Control Panel,
and click Printers and Other Hardware, select "TOSHIBA Controls", and
set "TV OUT" to "TOSHIBA Assist button" or "TOSHIBA Presentation
button" on "Buttons" tab.
User's Manual
Video-out jack
Figure 8-16 Connecting the S-Video cable to the Video-out jack
The Keyboard.
Optional Devices
The Keyboard,
TV adaptor cable's
S-Video plug
8-11