Toshiba TECRA A8 User Manual page 144

Power and Power-Up Modes
When entering a password, do not enter any characters (for example "!" or
"#") produced by pressing the Shift or Alt keys and so on.
■
Owner String (text box)
You can use this box to associate text with the password. After you
enter text, click Apply or OK. When the computer is started, this text will
be displayed together with the prompt asking you to enter a password.
■
If you forget your HDD User Password, TOSHIBA will NOT be able to
assist you, and your HDD will be rendered COMPLETELY and
PERMANENTLY INOPERABLE. TOSHIBA will NOT be held
responsible for any loss of any data, any loss of use or access to your
HDD, or for any other losses to you or any other person or organization
that result from the loss of access to your HDD. If you cannot accept
this risk, don't register the HDD User Password.
■
When setting the HDD Master Password, save the HDD User
Password settings in the BIOS SETUP Program.
■
When saving the HDD User Password shut down or restart the
computer. If the computer is not shut down or restarted, the saved data
may not be correctly reflected. For more information on shutting down
or restarting the computer, refer to
Refer to
for more information.
User Token field
■
Create (button)
You can use an SD card token, instead of entering the password. After
you have registered a password, insert an SD card in SD card slot and
click Create. You can use an SD card of any capacity, but it must be
formatted correctly.
If an unformatted card or one with an incompatible format is inserted,
you will be prompted to format it with a tool named TOSHIBA SD
Memory Card Format. To start the format tool, point to or click the
following items:
When you format an SD Memory card, all data will be deleted. Be sure to
save data on the card to other media before you format the card.
■
Disable (button)
Click this button to invalidate the token. You cannot re-validate old
tokens, but you can use the same SD cards to create new tokens.
6-14
Starting and Ending the BIOS Setup Program
start -> All Programs -> TOSHIBA -> Utilities -> SD Memory
Card Format
Turning on the power
section in Chapter 7
in Chapter 3.
User's Manual