How To Use The Memory Function - Omron HEM-629 Instruction Manual

HOW TO USE THE MEMORY FUNCTION

The Blood Pressure Monitor stores up to 21 measurement
values with the date and time.
1.
Press the MEMORY button to display the most
recent measurement values. Blood Pressure and
Pulse Rate alternate on the display.
2.
Press the MEMORY button again to display
previous measurement values. Blood Pressure
and Pulse Rate alternate on the display for
each previous measurement.
3.
Press and hold the MEMORY button to
display only Blood Pressure values. All values
currently stored in the memory will display
beginning with the most recent value.
4.
Press the START/STOP button to turn the power off.
How to delete the memory
1.
Press the MEMORY button to display the
stored contents.
2.
Press the both MEMORY button and the
START/STOP button simultaneously for
more than 2 seconds.
• All stored contents will be deleted.
NOTE: Measurements are retained in memory even after
the batteries are removed for battery replacement.
13