Components; Names And Functions - Denso BHT-200Q User Manual

2.2 Components

2.2.1 Names and Functions

Synchronization LED*
Flashes during wireless
communication.
Built-in antenna*
Do not cover this antenna
section with metal-
evaporated tape or by
hand.
Doing so may result in
communications
failures.
USB port
Trigger switch (M3 key)
Press this switch to start code
reading.
Reset button
Reading window
Stylus
Indicator LED
Illuminates in blue when the BHT has successfully read a 2D code or bar code.
Charge LED
Illuminates in red during charging and turns green at completion of charging.
IrDA interface port
Used to exchange data/programs with the
host PC via its integrated IR port or via the
optical communication unit CU-200.
Release button
Slide this button to open the
battery cartridge cover.
Battery cartridge cover
Remove this cover to replace the
battery cartridge.
Touch screen LCD (liquid crystal display)
Shows the characters and graphic patterns. You may
directly tap the screen with the stylus for data entry.
Trigger switch (M4 key)
Press this switch to start code reading.
Charge terminals
Hand belt
Compact Flash card slot
Insert an optional Compact Flash card
into this memory extension slot.
16
*Provided on the BHT-200QW.
Hand strap
Be sure to put your hand
through this strap to prevent
you from dropping the BHT
accidentally.
Rechargeable battery cartridge
Main power source of the BHT.
Release button