JVC DPT 115 Operation Manual page 11

Setup Switches located on the base of the DPT 115
1 2 3 4
The Function of each of these switches is as follows:
8, Pan & Tilt Only
•
Up: Pan, Tilt, Zoom and Focus Presets are enabled
•
Down: Only Pan & Tilt Presets are allowed
7, Teleconferencing Lens
•
Up: CCTV Lens
•
Down: Teleconferencing Lens
6, Common Return
•
Up: Independent Return for Zoom & Focus (4 Wire Control)
•
Down: Common Return for Zoom & Focus (3 Wire Control)
5, Reserved
•
Up: TBD
•
Down: TBD
4, RS-422
•
Up: Polls between RS-232 & RS-422 if DIP Switch 3 is also "Up"
•
Down: RS-422 Communications only ( If both RS-232 & RS-422 are "DOWN", LDCC Mode)
3, RS-232
•
Up: Polls between RS-232 & RS-422 if DIP Switch 4 is also "Up"
•
Down: RS-232 Communications only ( If both RS-232 & RS-422 are "DOWN", LDCC Mode)
2, 1/2 Manual Speed
•
Up: Pan & Tilt has maximum speed capability when manually controlled
•
Down: Pan & Tilt has 1/2 maximum speed capability when manually controlled
1, 1/2 Preset Speed
•
Up: Pan & Tilt has maximum speed capability when in Preset Mode
•
Down: Pan & Tilt has 1/2 maximum speed capability when in Preset Mode
2/12/05
5 6 7 8
11
ON
Pan & Tilt Only
Teleconferencing Lens
Common Return
Reserved
RS-422
RS-232
1/2 Manual Speed
1/2 Preset Speed
Document D0153