Safety Precautions; Description; Specifications - Cornelius TRIAD--150 Installation Manual

Ice/beverage dispenser

Hide thumbs Also See for TRIAD--150:

Operator's manual (17 pages)

Table Of Contents

Table of Contents

This ice dispenser has been specifically designed to provide protection against personal injury and eliminates

contamination of ice. To ensure continued protection and sanitation, observe the following:

ALWAYS: disconnect power to the dispenser before servicing or cleaning.

NEVER: place hands inside of hopper or gate area without disconnecting power to the dispenser.

Agitator rotation occurs automatically when dispenser is energized!

ALWAYS: be sure the removable lid is properly installed to prevent unauthorized access to the hopper interior

and possible contamination of the ice.

ALWAYS: be sure the upper and lower front panels are securely fastened.

ALWAYS: keep area around the dispenser clean of ice cubes.

Dispenser cannot be used with crushed or flaked ice.

CAUTION:

Use of bagged ice, which has frozen into large chunks, can void warranty.

The dispenser agitator is not designed to be an ice crusher. Use of large

chunks of ice which "jam up" inside the hopper will cause failure of the agitator

motor and damage to the hopper. If bagged ice is used, it must be carefully and

completely broken into small, cube-sized pieces before filling into the dispenser

hopper.

DESCRIPTION

The "ENDURO" series of ice dispensers solves your ice and beverage service needs in a sanitary, space saving,

economical way. Designed to be manually filled with ice from any remote ice-making source or top-mount ice

maker, these dispensers will dispense cubes (up to 1-1/4" in size), cubelets and hard-chipped or cracked ice;

and, in addition, several flavors of post-mix beverages. "BC" units include beverage faucets and a cold plate and

are designed to be supplied direct from syrup tanks and carbonator, with no additional cooling required.

IMPORTANT: For dispensing Scotsman "pellet" style ice (Model MH750 Ice makers), Kit Ice Diverter must be

installed on the dispenser.

SPECIFICATIONS

Maximum Number of Faucets Available: