Advanced Osd Settings Menu; Setting The Menu Mode - Pioneer PDP-61MXE1 Technical Manual

Menu Mode
ABL LINK
Use this function to set a uniform brightness for each
display.
Turn on the AUTO ID and set the DIVIDER (at 1, 4 or 9)
before the following operations.
Example: Setting "ON"
On "ABL LINK" of "VIDEO WALL" menu, select "ON", then
press the MENU/SET button.
VIDEO WALL
DIVIDER
POSITION
DISP. MODE
AUTO ID
SCREEN
P. ON DELAY
ABL LINK
REPEAT TIMER
SEL. ADJ.
Information
7 ABL LINK settings
ON: Sets a uniform brightness for each screen in a video
wall. This can be set only when a 2×2 or 3×3 video wall
is selected.
OFF: Sets the individual screen brightness for each
screen in a video wall.
* When this function is set "ON", connect your plasma
displays with the remote cable (optional) in the order
of the position numbers for the 2×2 video wall. See
the drawing below.
* If there are changes in the DIVIDER or POSITION,
the ABL LINK will automatically turn OFF.
No.1 No.2
REMOTE
No.4 No.3
IN
Display 1
No.1 No.2
REMOTE
OUT
No.4 No.3
Display 4
* With the 3×3 video wall, connect the final display to
the first display the same way as with 2×2 video wall.
Note: The remote control can be operated unless the IR
REMOTE is set to "OFF".
58
: 1
: NORMAL
: OFF
: OFF
: ON
: OFF
EXIT RETURN
REMOTE
OUT
No.1 No.2
REMOTE
No.4 No.3 OUT
REMOTE
IN
Display 2
REMOTE
OUT
No.1 No.2
REMOTE
No.4 No.3
IN
REMOTE
IN
Display 3
REPEAT TIMER
Use this to set two timers. Each timer can use the
DIVIDER, SOURCE and WORK TIME functions.
Turn on the AUTO ID and set the DIVIDER (at 1, 4 or 9)
before the following operations.
Example:
TIMER1 .. VIDEO1 will be displayed for 3 minutes.
TIMER2 .. PC1 will be displayed for 6 minutes in a 2¥2
video wall.
On "REPEAT TIMER" of "VIDEO WALL" menu, select
"ON", then press the MENU/SET button.
The "REPEAT TIMER" screen appears.
Adjust the items.
REPEAT TIMER
1 DIVIDER
SOURCE
WORK TIME
2 DIVIDER
SOURCE
WORK TIME
SEL. ADJ.
Information
7 REPEAT TIMER settings
DIVIDER: Divide the screen into 1, 4 or 9 sections.
SOURCE: Set the input mode to be displayed.
WORK TIME: Can be set to up to 4 hours 15 minutes
in units of 1 minute.
If you set both timers, Timer 1 and Timer 2 run
consecutively.
In the case of the Video wall, timer No.1 can be used
to control all the displays simultaneously.
* This becomes effective when the on-screen menu
goes out.

4.3.9 Advanced OSD Settings Menu

Setting the menu mode

This allows you to access full menu items.
When P. ON DELAY or ABL LINK is ON, this won't be
turned OFF.
Example: Setting "ON"
On "ADVANCED OSD" of "MAIN MENU", select "ON".
MAIN MENU 1 / 2
PICTURE
SOUND
SCREEN
OPTION1
ADVANCED OSD : OFF
NEXT PAGE
SEL. ADJ. EXIT EXIT
Information
7 ADVANCED OSD settings
ON: All of the main menu items are available for
advanced users.
OFF: Some of the main menu items are not available
(e.g. OPTION2 and OPTION3).
: 1
: VIDEO1
: 00H03M
: 4
: PC1DSUB
: 00H06M
EXIT RETOUR
MAIN MENU 1 / 2
PICTURE
SOUND
SCREEN
OPTION1
OPTION2
OPTION3
: ON
ADVANCED OSD
NEXT PAGE
SEL. ADJ. EXIT EXIT