Manual Control - Blodgett BC-20E Installation Operation & Maintenance

1
3
4
5
8
10
13
15
Figure 5
COnTROLS IdEnTIFICaTIOn
1. MODE SELECTOR SWITCH - turns power to the
oven on or off. Allows selection of Steam, Hot Air,
Combi or Cool Down Modes.
2. DISPLAY - displays time and temperature informa-
tion.
3. TEMPERATURE DIAL - used to set desired cooking
temperature.
4. HEAT LAMP - lights when the oven is calling for heat
5. TIMER LED - lights when the cook time is displayed
2
6. PROBE ACTUAL LED - lights when the actual probe
temperature is displayed
7. PROBE SETPOINT LED - lights when the core set-
point temperature is displayed
6
8. TIMER/PROBE KNOB - use to select and set either
cook time or probe temperature
7 9. STEAM ON DEMAND DISPLAY - displays the steam
on demand time
10. STEAM ON DEMAND LAMP - lights when steam on
9
demand is activated.
11. STEAM ON DEMAND KNOB - use to set duration for
steam on demand
11
12. FAN SPEED KEY - used to select fan speed.
13. DELIME LAMP - Flashes when steam generator de-
liming is needed. Remains steady when deliming pro-
cess is active.
12
14. FILL LAMP - illuminated until the steam generator is
filled with water.
15. PROBE CONNECTION - used to connect the core
14
temperature probe to the control.
16. GAS/HEAT CONTROL SWITCH - used to turn gas or
heat on or off.
16
13
Operation

Manual Control