Table of Contents
Advertisement
Operation
Solid State Temperature Control
1
2
3
4
5
6
Figure 8
COMPONENT DESCRIPTION
1. POWER SWITCH Controls the power to the
oven. When switched to OVEN ON, the oven
is operating in the normal heating mode.
OVEN OFF, turns the oven off.
2. DIGITAL DISPLAY Displays the time, tem
perature and controller related information.
3. TIME DIAL A dial to set the cook time.
4. TEMPERATURE DIAL A dial to set the cook
temperature.
5. START TIMER Starts the timing cycle.
NOTE: To display the ACTUAL OVEN TEM
PERATURE, press and hold for 3 sec
onds.
6. CANCEL
Press to cancel the end of time
cycle warning. Press to abort time cycle in
progress.
OPERATION
1. Toggle the POWER SWITCH (1) to OVEN ON.
The cooling fan will start.
2. Turn the TEMPERATURE DIAL (3) to select the
desired pre heat temperature. The selected
pre heat temperature will begin flashing.
3. When the temperature shown in the DIGITAL
DISPLAY (2) stops flashing, the oven has
reached operating temperature. Set the de
sired TIME and TEMPERATURE manually
with the appropriate dials (3 and 4).
4. Press START TIMER (5). The timer will count
down the set time. Upon completion of the set
time, the buzzer will sound. Press CANCEL (6)
and remove the product.
5. To shut the oven off, toggle the POWER
SWITCH (1) to OVEN OFF.
10
Advertisement
Table of Contents
