Gearbox Outer Linkage; Rear Wheel Drive Selector - Alfa Romeo 33 Workshop Manual

4 x 4
Place thé gearbox - differential -
fitted with suitable support brackets,
and proceed to dismantle the rear
wav.
1 .
pin 01 of the stud @ connecting
the rear hheel drive selector bar @
and the corresponding rod. Remove
the stud. ~
The split~ pin must not be reused.
1 Rear wheel drive selector bar
2 S p l i t piR
3 Stud
4 R e a r paver'
2 . _ Urrscrew b o l t @ c o n n e c t i n g
r e a r w h e e l -1 drive selector lever @
GEARBOX OUTER' LImNKAGE
As per (Alfa) Volumes I and II except for the following procedures.
silentblock @ from lever support.
1 Lever support
2 Bolt
3 Screw
4 Rear wheel dritie selector bar
5 Rear wheel drive seléctor lever
6 Silentblock
7 Silentblock
3. Loosen screw @ connecting
rear
wheel
ver @and corresponding bar @.
drive
selector le-
13-2
If necessary remove the silent-
on linkage articulated joints are in
good condition; replace them if
necessary.,
Assembly
Go on assembling rear drive selector
following disassembly procedure in
reverse sepuence.
P A 3 3 3 5 0 0 8 8 3 3 0 0