Kyocera FS-1020D Installation Manual page 24

Process unit
(A)
Registration
Roller(metal)
(B)
Registration
Roller(metal)
22
4
Lift the process unit, together with the
toner container, out of the printer.
5
Use the following procedure that corre-
sponds to the status of the jammed
paper, in order to remove that paper.
(A) If the leading edge of the jammed
paper has been fed further into the
printer than the metal registration
roller, remove the jammed paper by its
leading edge.
(B) If the paper has not been fed as far
as the metal registration roller,
remove the jammed paper from the
MP tray side.