Kyocera FS-1020D Installation Manual page 13

Release Button
Paper Stopper
Release Button
1
Pull the paper cassette all the way out of
the printer.
2
Adjust the position of the paper stopper
located at the rear of the paper cassette.
Press in the release button and slide the
stopper to the desired paper size. When
shipped from the factory, the paper cas-
sette is set to either A4 or Letter size.
3
Adjust the position of the paper guides
located on the left and right sides of the
paper cassette. Press in the release but-
Paper Guide
ton on the left side guide and slide to the
desired paper size.
When using custom size paper, move
the paper guides and paper stopper all
the way out, insert the paper, then
adjust the paper guides and paper
stopper to the size of the paper. Adjust
them so that they are in light contact
with the paper.
In order to load either Folio or
Oficio II size paper into the
paper cassette, refer to Adjust-
ing the paper stopper for Folio
and Oficio II sizes on page 14
and adjust the paper stopper.
The printer does not automati-
cally detect the size of the paper
loaded into the paper cassette
or MP tray. As a result, when-
ever you load paper having a
different size, you must adjust
the paper size. For details,
refer to the Operation Guide
contained as an electronic file
in the CD-ROM supplied with
the printer.
11