Table of Contents
Advertisement
MAN-MAXPRO
REV. B.0.
•
•
•
•
Note: Once the gas is chosen, the program automatically
To print the instrument parameters while on this dialog box,
simply click on the Print button at the bottom.
To store the instrument parameters to a default user setting,
click on the Store User Default Instrument Parameters button.
The following dialog box appears: "Are you sure that you want
to overwrite the default instrument parameters?" Click on Yes.
The user setting is stored.
To restore the instrument parameters from a user setting, click
on the Restore User Default Instrument Parameters button.
The following dialog box appears: "Are you sure that you want
to restore the user-defined setting?" Click on Yes. The user
setting is restored.
To restore the instrument parameters to the factory default,
click on the Restore Factory Default Instrument Parameters
button. The following dialog box appears: "Are you sure that
you want to restore the factory default setting?" Click on Yes.
When it displays "The factory default instrument parameters
are loaded," click on OK.
7. DATA LOGGING
TWA (TWA alarm levels)
STEL (STEL alarm levels)
Inst. (Instantaneous alarm levels)
Calibration Level
provides the correct default TWA alarm levels that
conform to United States OSHA recommendations. It
also chooses the default values for all other alarm levels
and calibration levels. The immediate low alarm levels,
immediate high alarm levels, and calibration levels may
be changed.
58
Advertisement
Table of Contents
