Mercury MerCruiser Product Applications Manual page 12

Mercury MerCruiser declares that our sterndrive or inboard engines without integral
exhaust, when installed in a recreational craft, in accordance with the manufacturers
supplied instructions, will meet the exhaust emissions requirements of the directive
mentioned above. This engine must not be put into service until the recreational craft in
which it is to be installed has been declared in conformity, if so required, with the relevant
provision of the directive.
Electromagnetic Compatibility Directive 89/336/EC, 92/31/EEC and 93/68/EEC
Generic emission standard
Generic immunity standard
Vehicles, boats and internal combustion engine
driven devices ‑ Radio disturbance characteristics
Electrostatic discharge testing
The notified body responsible for surveillance of the quality system under Full Quality Assurance Module H
of Directive 2003/44/EC is:
Det Norske Veritas
Norway
Notified Body Number: 0575
This declaration is issued under the sole responsibility of Mercury Marine and Mercury MerCruiser.
President ‑ Mercury Marine, Fond du Lac, WI USA
Regulatory contact:
Engineering - Regulatory
MerCruiser
3003 N. Perkins Rd
Stillwater, Oklahoma 74075
USA
(405) 377-1200
RECREATIONAL CRAFT DIRECTIVES—EU
REQUIREMENTS FOR BOAT COMPANIES
• Craft requirements as stated in Annex I of the Recreational Craft Directives require
adding the CE marking to the builder's plate (capacity plate), not the HIN plate.
• Adherence to all component requirements as stated in Annex II of the Recreational
Craft Directives.
Mercury Marine will meet the amended Recreational Craft Directives for all Mercury
Outboard and Mercruiser product equipped with integral exhaust.
Boats that are equipped with non integral exhaust (after market exhaust) must be tested
and certified by the boat manufacturer for conformance with requirements as stated in
Annex I of the Recreational Craft Directives. The boat must be equipped with the intended
exhaust system at the time of testing.
Boats produced in the US must clear customs on EU soil by 12/31/2005 at the latest to be
exempt from 2006 requirements.
OWNER RESPONSIBILITY
The owner is required to have routine engine maintenance performed to maintain emission
levels within prescribed certification standards.
90-863758060 AUGUST 2006
EN 50081‑1
EN 50082‑1
SAE J551 (CISPR 12)
EN 61000‑6‑2; EN 61000‑4‑2; EN61000‑4‑3
Patrick C. Mackey
Important Information
Page 1A-7