Mercury MerCruiser Product Applications Manual page 11

Important Information
IMPORTANT: 5.0L, and 5.7L models are not CE certified at the time of this publication.
Contact the appropriate Mercury MerCruiser Product Application Engineers (PAE), or
Mercury MerCruiser Technical Service for information on CE certified product.
THIS ENGINE CONFORMS TO 2003 CALIFORNIA EMISSION
REGULATIONS FOR SPARK IGNITION MARINE ENGINES
REFER TO OWNER'S MANUAL FOR MAINTENANCE
SPECIFICATIONS AND ADJUSTMENTS
SERIAL#
"SERIAL#" ‑ Engine serial number
"FAMILY" ‑ Engine family
"FEL." ‑ Family emission limit
"D.O.M." ‑ Date of manufacture
"DISP" ‑ Piston displacement
CE ‑ When this mark is present in the lower right corner of the Emission Control Information
Label, on the engine, the Declaration of Conformance applies.
NOTE: The following applies to CE marked products only.
DECLARATION OF CONFORMANCE – MERCURY MERCRUISER
This sterndrive or inboard engine when installed in accordance to Mercury MerCruisers'
instructions complies with the requirements of the following directives by meeting the
associated standards, as amended:
Recreational Craft Directive 94/25/EC; 2003/44/EC
Owner's manual (A.2.5)
Openings in Hull, Deck and superstructure (A.3.4)
Handling characteristics (A.4)
Inboard Engine (A.5.1.1)
Fuel System (A.5.2)
Electrical System (A.5.3)
Steering system (A.5.4)
Exhaust emission requirements (B.2)
Owner's manual (B.4)
Noise emission levels (C.1)
Ignition‑protected equipment (Annex II)
Page 1A-6
OMXXXXXX
XXXXX XXXXXX
FAMILY
FEL. XX.X g/kW-hr
Emission control label — CE marked
Applicable Requirement
EMISSION CONTROL
INFORMATION
D.O.M. Dec 2004
X.XL
DISP.
ISO 10240
ISO 9093‑1; ISO 9093‑2
ISO 8665
ISO 15584; ISO 10088; ISO 7840; ISO 10133
ISO 10088; ISO 7840; ISO 8469
ISO 10133; ISO 8846
Applicable portions of: ISO 10592, ISO 8848 and
ABYC P‑17
ISO 8178
ISO 8665
ISO 14509
ISO 8846; SAE J1171; SAE J1191; SAE J 2031
0575
10652
Standards Applied
90-863758060 AUGUST 2006