IBM Brocade 4 Gb SAN Switch Module Installation Manual page 40

4. At the Login prompt, type the initial default user name, USERID, and press
Enter. At the Password prompt, type the initial default password, PASSW0RD
(the sixth character is a zero, not the letter O). The user name and
password are case sensitive.
5. If you are accessing the switch module for the first time, press Enter to
change the switch passwords. You are prompted for a password for the
root, factory, and user accounts.
A Telnet password-change window opens.
After you have changed all of the passwords, the command prompt is
displayed in the Telnet window.
28
Brocade 4 Gb SAN Switch Module: Installation Guide