IBM Brocade 4 Gb SAN Switch Module Installation Manual page 14

The Brocade 20-port switch module enables use of all 14 internal and six
external ports. The Brocade 10-port switch module enables use of seven
internal and three external ports. You can upgrade the Brocade 10-port switch
module by purchasing an optional license key that provides 20-port capability.
Record information about the switch module in the following table. You will
need this information when you register the switch module with IBM.
Product name
Model number
Serial number
Media access control
(MAC) address
Worldwide name (WWN)
The switch module has the following labels:
v Product name label, which is on the right side of the switch module
v Serial number label, which contains the product part number and serial
number and is on the left side of the switch module
v Safety certification label, which is on the left side of the switch module
v Common Language Equipment Identification (CLEI) label, which is on the
left side of the switch module
v Media access control/worldwide name (MAC address/WWN) label, which
is on the left side of the switch module
v Media access control address (MAC address) label, which is on the bottom
of the information panel
See "Major components of the switch module" on page 9 for the locations of
the labels that contain the MAC address/WWN and serial number
information.
2
Brocade 4 Gb SAN Switch Module: Installation Guide
_____Brocade 20-port 4 Gb SAN Switch Module for IBM
Eserver BladeCenter or
_____Brocade 10-port 4 Gb SAN Switch Module for IBM
Eserver BladeCenter
_____________________________________________
_____________________________________________
_____________________________________________
_____________________________________________