Disassembly - Pioneer DVR-310-S Service Manual

5

7.1.7 DISASSEMBLY

1
Bonnet S, Tray Panel Assy
1
Remove the bonnet by removing the eight screws.
2
Press the STANDBY/ON button to turn on the power.
3
Press the 0 button to open the tray.
4
Remove the tray panel assy.
5
Press the 0 button to close the tray.
6
Press the STANDBY/ON button to turn off the power.
2 6
4
3
3
5
Tray panel assy
How to open the tray when the power cannot be on
When the player cannot eject disc tray due to power failure or
any other reasons, open the jack door, and use a long thin pole
and push the emergency eject hole under the tray panel to eject.
Note: This photograph shows other models.
However, the work method is the same.
Emergency eject hole
Jack door
5
6
5
long thin pole
6
7
2
Front Panel Section
1
Remove the two screws.
2
Remove the four hooks.
3
Remove the front panel section.
1
2
2
3
3
HDD Stay
1
Remove the one screw.
2
Remove the three screws.
3
Remove the HDD stay.
1
2
DVR-310-S
7
8
1
2
2
Front panel section
HDD stay
3
2
2
8
A
B
C
D
E
F
83