Pioneer DVR-310-S Service Manual page 72

1
Table 3: List of Key Codes
How to enter each check mode
Test mode remote control unit : [A8**]
A
Remote control unit supplied with the DVR : [AB**]
No. Check Item
EE system
1
(same as preview)
B
2 Error-rate measurement
3 Settings for specific areas
How the ESC code is processed
• When the ESC code is received, ESCAPE mode is entered, but in combination with the code(s) that follow(s), a specific meaning is added.
• If ESC codes are received continuously, ESCAPE mode is retained.
C
D
E
F
72
1
2
Key Input Operation / purpose
[ESC] → [A.MON]
Turns on/off EE mode cyclically
Starts the EE system in EE mode
[PLAY]
(main-unit setting rate)
[STOP] Stops the EE system in EE mode
V-mode recording:
After recording for 10 seconds, the
unit starts playback while
displaying the error rate.
[ESC] → [SIDEB]
DVD-Video:
The error rate is automatically
measured, then the result will be
displayed.
Enters Adjustment mode for AVIO
[ESC] → [CHP/TIM]
settings
Determines the settings, then exits
[ESC]
Adjustment mode
DVR-310-S
2
3
Remarks
Make sure that CGMS = 11 becomes when
CGMS = 10 is input.
EE mode: Simulation mode for recording status
For details, see
" 7.1.4 ERROR RATE MEASUREMENT ".
Settings are made for the selected input
(TUNER, LINE).
For details, see
" 7.1.5 SETTINGS FOR SPECIFIC AREAS ".
3
4
4