Pioneer DVR-310-S Service Manual page 74

1
No. Item
A
TC
8
RD
RT
ASPECT
CGMS
9
APSTB
DEC
B
SF
0
QU
AMODE
-
[DVencode:XXX]
TC
=
RD
RT
ASPECT
C
~
CGMS
APSTB
D
E
F
74
1
2
Description
Time-code data of the DVdecode Stream, or
response data of the Time Code command
Rec Date of DVdecode Stream
Rec Time of DVdecode Stream
Aspect Ratio of DVdecode Stream
CGMS of DVdecode Stream (from left to right,
CGMS data of bits 5-4: Audio ch2, bits 3-2:
Audio ch1, and bits 1-0: Video)
APS trigger bit of DVdecode stream
With/without DVdecode stream input
Sampling Frequency of DVdecode Stream
QUANTIZATION of DVdecode Stream
AUDIO MODE of DVdecode Stream
Whether Yes (in the process of requesting DV
output) or No is indicated in XXX
TIME CODE of DVencode stream
REC DATE of DVencode stream
REC TIME of DVencode stream
Aspect Ratio of DVencode stream
CGMS of DVencode stream (common to
video, audio ch1 and audio ch2)
APS trigger bit of DVencode stream
2
3
Stream time-code data are obtained when playback in
the forward direction is performed. Otherwise, time-code
data are obtained through an AV/C command.
Recording of DV input cannot be performed unless the
value of CGMS is 00.
With input: Signal type (525-60, 625-50, 1125-60, 1250-
50, or Invalid) is indicated, Without input: "No" is
indicated.
If SF is 44 kHz, it is considered that 44.1-kHz audio is
input, and sound is muted on the unit.
Normally, Yes is indicated only with HDD or DVD
playback
Normally, sources other than CGMS=00 are not output.
DVR-310-S
3
4
Remarks
4