Environmental Notices; Product Recycling And Disposal; Battery Return Program - IBM zSeries 800 Installation Manual

Environmental Notices

Product Recycling and Disposal

This unit contains materials such as circuit boards, cables, electromagnetic
compatibility gaskets and connectors which may contain lead and copper/beryllium
alloys that require special handling and disposal at end of life. Before this unit is
disposed of, these materials must be removed and recycled or discarded according
to applicable regulations. IBM offers product-return programs in several countries.
Information on product recycling offerings can be found on IBM's Internet site at
http://www.ibm.com/ibm/environment/products/prp.shtml.
IBM encourages owners of information technology (IT) equipment to responsibly
recycle their equipment when it is no longer needed. IBM offers a variety of
programs and services to assist equipment owners in recycling their IT products.
Information on product recycle offerings can be found on IBM's Internet site at
http://www.ibm.com/ibm/environment/products/prp.shtml.

Battery Return Program

This product may contain sealed lead acid, nickel cadmium, nickel metal hydride,
lithium, or lithium ion battery(s). Consult your user manual or service manual for
specific battery information. The battery must be recycled or disposed of properly.
Recycling facilities may not be available in your area. For information on disposal of
batteries outside the United States, go to
http://www.ibm.com/ibm/environment/products/batteryrecycle.shtml or contact your
local waste disposal facility.
In the United States, IBM has established a return process for reuse, recycling, or
proper disposal of used IBM sealed lead acid, nickel cadmium, nickel metal hydride,
and other battery packs from IBM Equipment. For information on proper disposal of
these batteries, contact IBM at 1-800-426-4333. Please have the IBM part number
listed on the battery available prior to your call.
In the Netherlands, the following applies:
xii
zSeries 800: Installation Manual for Physical Planning
Level 04a, June 21, 2004