Porter-Cable US58 Instruction Manual page 3

8 . DISCONNECT
S U P P LY H O S E
maintenance, clearing a jammed fastener,
leaving work area, moving tool to another
location, or handing the tool to another
person. Fig. 5.
9 . NEVER USE A TO O L t h a t i s l e a k i n g a i r,
has missing or damaged pa r ts , o r r e q u i r e s
repa i r. Make sure all screws and caps are
securely tightened.
1 0 . DO NOT
SAFETY W ARNING LABEL. I f l a b e l i s
missing, damaged or unreadable, conta c t
your Porter-Cable Service Center for a
replacement.
11 . O N LY USE PARTS, FASTENERS, A N D
ACCESSORIES recommended by Porter-
Cable. Fig. 6.
1 2 . CONNECT
B E F O R E loading fasteners, to prevent a
fastener from being fired during connection.
The tool driving mechanism may cycle when
tool is connected to the air supply. F i g . 7 .
1 3 . A LW AYS
C O N TAINS FASTENERS. Keep the tool
pointed away from yourself and others at all
times. No horseplay. Respect the tool as a
working implement.
1 4 . DO NOT LOAD
trigger depressed, to prevent unintentional
f i r i n g o f a f a s t e n e r. F i g . 8 .
1 5 . REMOVE FINGER
when not driving fasteners. Never carry tool
w i t h f i n g e r o n t r i g g e r : t o o l w i l l f i r e a f a s t e n e r
i f t r i g g e r i s d e p r e s s e d . F i g . 9 .
TO O L FROM
before doing
USE TO O L WITHOUT
TO O L TO AIR SUPPLY
ASSUME THE
FA S T E N E R S with
FROM
AIR
tool
Fig. 5
Fig. 6
Fig. 7
Fig. 8
TO O L
Fig. 9
TRIGGER
3