TANDBERG MediaPlace MXP User Setup Manual page 12

[ 12 ] INSTALLATION
;,"'+--5,6% <$3K#2'3$
The projector must be mounted to the adjustable projector bracket that is already
installed on shelf of the mobile cart. The top half of the projector mount is to be
installed to the projector with the parts from the
ing illustration for mounting the projector.
A''+275,6% .3)N7+-=% *3(,'
1. Carefully turn the projector upside-down.
2. Place the top-half of the projector mount onto the bottom of the projector.
Make sure that the existing screws on the plate face away (up) from the
bottom of the projector, and the single screw is toward the rear of the
projector.
3. Align the holes on the plate with that of the projector.
4. Set the plate up by placing one 1/2" plastic spacer and one 3/8" plastic
spacer on the vented side of the projector.
5. Do the same on the other side of the projector with one 1/2" plastic spacer.
6. Screw the plate to the projector through the plastic spacers.
TANDBERG MediaPlace Videoconferencing System
. Refer the follow-
ACCESSORY KIT
D5029302