TANDBERG MediaPlace MXP User Setup Manual page 11

TANDBERG MediaPlace Videoconferencing System
;,"'+--5,6% @30)3,#,'"
;,"'+--5,6% @3/#2
The TANDBERG set-top codec must be mounted to the adjusting shelf of the
mobile cart. Refer the following illustration for mounting the codec.
1. Insert the white, plastic nut inserts into the bottom of the TANDBERG set-
top codec.
2. Place the codec onto the shelf and align the holes of the codec to the holes
of the shelf.
3. Use the included thumbscrews to secure the codec to the shelf.
Once the codec is mounted to the shelf, match all of the labeled connections,
found in the cable loom, to the appropriate connections on the codec.
D5029302
INSTALLATION [ 11 ]
T
HE ADJUSTING SHELF CAN BE
REMOVED FROM THE CART IF
.
NEEDED
T
ILT ONE SIDE OF THE SHELF SO
THAT ONE SIDE IS AT THE BOTTOM
OF THE SLIDING GROOVES WHILE
THE OTHER SIDE IS TITLED TO THE
.
TOP OF THE SLIDING GROOVES
T
HE SHELF SHOULD NOW BE
ABLE TO BE REMOVED FROM THE
.
CART
R
EPLACE THE SHELF IN THE
.
SAME MANNER