Dubbing; Dubbing To A Vcr - JVC GR-DVL520 Instructions Manual

50
EN
Power Switch
To
S-VIDEO
S-Video cable
(optional)
Yellow to
VIDEO** IN
To S-VIDEO IN
* When connecting the cables, open this cover.
** Connect when an S-Video cable is not used.
Connector cover*
Audio/Video
cable (provided)
White to
AUDIO L IN
Red to
AUDIO R IN
VCR
TV

Dubbing To A VCR

1
Following the illustration, connect the camcorder
and the VCR. Also refer to pg. 22 and 23.
2
To AV
Set the VIDEO/MEMORY Switch to "VIDEO" (GR-
DVL720/DVL520 only), then set the camcorder's
Power Switch to "PLAY" while pressing down the
Lock Button located on the switch, turn on the VCR's
power, and insert the appropriate cassettes in the
camcorder and the VCR.
3
Engage the VCR's AUX and Record-Pause modes.
4
Engage the camcorder's Play mode to find a spot
just before the edit-in point. Once it is reached, press
4/6 on the camcorder.
5
Press 4/6 on the camcorder and engage the
VCR's Record mode.
6
Engage the VCR's Record-Pause mode and
press 4/6 on the camcorder.
7
Repeat steps 4 through 6 for additional editing,
then stop the VCR and camcorder when finished.
NOTES:
As the camcorder starts to play your footage it will
appear on your TV. This will confirm the connections
and the AUX channel for dubbing purposes.
Before you start dubbing, make sure that the
indications do not appear on the connected TV. If they
do, they are being recorded onto the new tape.
To choose whether or not the following displays
appear on the connected TV . . .
• Date/Time
..... set "DATE/TIME" to "AUTO", "ON" or "OFF" in
the Menu Screen (
Or, press DISPLAY on the remote control
(provided with GR-DVL720 only) to turn on/off
the date indication.
• Time Code
..... set "TIME CODE" to "ON" or "OFF" in the Menu
Screen (
• Playback Sound Mode, Tape Speed And Tape
Running Displays
..... set "ON SCREEN" to "LCD" or "LCD/TV" in the
Menu Screen (
The S-Video cable is optional. Be sure to use the
YTU94146A S-Video cable.
Consult the JVC Service Center described on the
sheet included in the package for details on its
availability. Make sure to connect the end with a
core filter to the camcorder. The core filter reduces
interference.

DUBBING

pg. 48).
pg. 48).
pg. 48).