Protecting Files - JVC GR-DVL520 Instructions Manual

30
EN
MENU/BRIGHT Wheel
Power Switch
Lock Button
Display
MENU
PROTECT
DELETE
DPOF
NO . RESET
FORMAT
D I SPLAY
END
M E NU
PROTECT CUR RENT
PROT . AL L
CANC . AL L
RETURN
P ROTECT
PROTECTED
RETURN
VIDEO/MEMORY Switch
(Open the LCD monitor
to access this switch.)
Menu Screen
PROTECT Screen
MEMORY CARD PLAYBACK

Protecting Files

The Protect mode helps prevent the accidental
erasure of files.
1
Load a memory card (
2
Set the VIDEO/MEMORY Switch to "MEMORY",
then set the Power Switch to "PLAY" while pressing
down the Lock Button located on the switch.
• A stored image is displayed.
3
Press the MENU/BRIGHT wheel in. The Menu
Screen appears. Rotate the MENU/BRIGHT wheel to
select "PROTECT", then press it.
4
Rotate the MENU/BRIGHT wheel to select the
desired mode.
CURRENT : Protects the currently displayed image
file.
PROT.ALL : Protects all image files stored on the
memory card.
5
Press the MENU/BRIGHT wheel in. The
PROTECT Screen appears.
• If you selected "CURRENT" in step 4, press 2 or
3 to select the desired file.
6
Rotate the MENU/BRIGHT wheel to select
"EXECUTE" and press it.
• To cancel protection, select "RETURN".
NOTES:
If the " " mark appears, the currently displayed file is
protected.
When the memory is initialized or corrupted, even
protected files are deleted. If you do not want to lose
important files, transfer them to a PC and save them.
TO REMOVE PROTECTION
Before doing the following, perform steps 1 through 3
above.
4
Rotate the MENU/BRIGHT wheel to select the
desired mode.
CURRENT : Removes protection from the currently
displayed image file.
CANC.ALL : Removes protection from all image files
stored on the memory card.
5
Press the MENU/BRIGHT wheel in. The
PROTECT Screen appears.
• If you selected "CURRENT", press 2 or 3 to
select the desired file.
6
Rotate the MENU/BRIGHT wheel to select
"EXECUTE" and press it.
• To cancel selection, select "RETURN".
(cont.)
pg. 14).