Grip Adjustment; Viewfinder Adjustment; Tripod Mounting - JVC GR-DVL505 Instructions Manual

10
EN
Power Zoom
Lever
Recording Start/Stop
button
2
Power Switch
Diopter Adjustment
Control
PAUSE
1
3
GETTING STARTED

Grip Adjustment

1
Separate the Velcro strip.
2
Pass your right hand through the loop and grasp
the grip.
3
Adjust so that your thumb and fingers can easily
operate the Recording Start/Stop Button and
Power Zoom Lever. Refasten the Velcro strip.

Viewfinder Adjustment

1
Set the Power Switch to "
1
pressing down the Lock Button located on the
switch.
2
Turn the Diopter Adjustment Control until the
indications in the viewfinder are clearly
focused.
Shoulder Strap Attachment
1
Make sure the battery pack or DC cord is
removed. Following the illustration, thread the
strap through the eyelet
thread it through the buckle
procedure to attach the other end of the strap to
3
the other eyelet
making sure the strap is not twisted.

Tripod Mounting

1
Align the screw and camera direction stud on
the tripod with the camera's mounting socket
and stud hole. Then tighten the screw.
•Some tripods are not equipped with studs.
CAUTION:
When using a tripod, be sure to open and
extend its legs fully to stabilize the
camcorder. To prevent damage to the unit
caused by falling over, do not use a small-
sized tripod.
(cont.)
" or " " while
1
, then fold it back and
2
. Repeat the
located under the Grip Strap ,