Basic Recording For Video And D.s.c - JVC GR-DVL505 Instructions Manual

20
EN
Zoom in (T: Telephoto)
1 xW T
1 0 xW T
Zoom display
1 0 xW T
Approximate zoom ratio
Power Zoom Lever
Power Switch
RECORDING
20xW T
40xW T
Zoom out (W: Wide angle)
Digital zoom
zone
10X (optical)
zoom zone

Basic Recording For Video And D.S.C.

Zooming
FEATURE:
PURPOSE:
To produce the zoom in/out effect, or an instantaneous
change in image magnification.
OPERATION:
Zoom In
Slide the Power Zoom Lever towards "T".
Zoom Out
Slide the Power Zoom Lever towards "W".
The further you slide the Power Zoom Lever, the
quicker the zoom action.
NOTES:
Focusing may become unstable during Zooming. In
this case, set the zoom while in Record-Standby,
lock the focus by using the manual focus
( pg. 23), then zoom in or out in Record mode.
Zooming is possible to a maximum of 250X, or it
can be switched to 10X magnification using the
optical zoom ( pg. 25).
Zoom magnification of over 10X is done through
Digital image processing, and is therefore called
Digital Zoom.
During Digital zoom, the quality of image may
suffer.
Digital zoom cannot be used w hen digital image
processing, such as Picture Wipe/Dissolve
( pg. 28, 29) or Video Echo (
activated.
Macro shooting (as close as approx. 5 cm (2") to the
subject) is possible when the Power Zoom Lever is
set all the way to "W". Also see "TELE MACRO" in
the Menu Screen on page 26.
pg. 30), is