Features; Product Specifications; Know Your Hammer Drill - RIDGID R861150 Operator's Manual

FEATURES

PRODUCT SPECIFICATIONS

Chuck ...........................................................1/2 in. Keyless
Motor .................................................................. 18 Volt DC
Switch ................................................ Variable Speed (VSR)
No Load Speed ....................... 0-450/0-1,600 r/min. (RPM)

KNOW YOUR HAMMER DRILL

See Figure 1, page 14.
The safe use of this product requires an understanding of the
information on the product and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
AUXILIARY HANDLE ASSEMBLY
Your drill is equipped with an auxiliary handle assembly.
For ease of operation, use the handle with either the left or
right hand.
BIT STORAGE
Bits provided with the drill can be placed in the storage area,
located on the base of the drill.
BLOWS PER MINUTE
This tool features an impact speed of 0-7,200 BPM (Blows
Per Minute) in LO speed and 0-25,600 BPM in HI speed.
Blows Per Minute is the number of impacts per minute.
DIRECTION OF ROTATION SELECTOR
(FORWARD/REVERSE/CENTER LOCK)
Your drill has a direction of rotation (forward/reverse/center
lock) selector located above the switch trigger for changing
the direction of bit rotation. Setting the switch trigger in the
OFF (center lock) position helps reduce the possibility of
accidental starting when not in use.
Blows per minute ........................... 0-7,200/0-25,600 BPM
Clutch ................................................................ 24 Position
Torque ...................................................................
MODE SELECTOR
With the mode selector, you can select drill, drive, or ham-
mer mode.
KEYLESS CHUCK
The keyless chuck allows you to hand-tighten or release the
drill bit in the chuck jaws.
LED LIGHT
The LED light, located on the front of the tool base, illumi-
nates when the switch trigger is depressed. This provides
extra light for increased visibility.
TORQUE ADJUSTMENT RING
Your drill has a 24-position clutch. The torque adjustment
ring can be turned to select the right amount of torque for
your application.
TWO-SPEED GEAR TRAIN
The two-speed gear train is designed for drilling or driving
at LO (1) or HI (2) speeds. A slide switch is located on top
of your drill for selecting either LO (1) or HI (2) speed.
VARIABLE SPEED
The variable speed switch trigger delivers higher speed with
increased trigger pressure and lower speed with decreased
trigger pressure.
7 - English
565 in.lb.