UNI-T UT71A Operating Manual page 22

Model UT71A/B/C/D/E: OPERATING MANUAL
Button
SEND In Store, each press to decrease a second on the storing
MAXMIN
interval.
Press EXIT to exit
Press to enter relative mode, the primary display shows
The left secondary display shows the present measurement
REL
value. The right secondary display shows the stored value.
The primary display shows the present measurement value
minus the stored value.
Press EXIT to exit relative mode.
In Setup, each press to increment an Option.
In Recall, each press to recall the next stored reading.
In Store, each press to increase a second on the storing interval.
Press to output the data, AUTO mode switch off. The
SEND
primary display shows "SEND".
(UT71A only)
Press EXIT to exit.
Table 2-2. Functional Buttons
Description Access Method
. Press the button once.
Press and hold the button for over 1
second.
Press the button once.
19