Raymarine hsb2 PLUS Series Owner's Handbook Manual page 140

Chapter 5: Standard Chart Operations
➤ To receive incoming waypoints on SeaTalk or NMEA:
1. To display the waypoint list press MARKS followed by the WAYPOINT LIST
MARKS
soft key.
WAYPOINT
Press the WAYPOINT TRANSFER soft key.
LIST
2. Press the soft key RECEIVE WPTS FROM ST/NMEA .
The soft key changes to STOP RECEIVING WAYPOINTS .
WAYPOINT
TRANSFER
When waypoints are transmitted by other equipment they are added to the
waypoint list on the chartplotter. Routes transmitted on NMEA are
appended to the route list.
3. To disable waypoint transfer, press the soft key STOP RECEIVING WAY-
POINTS .
Alternatively, press ENTER , or CLEAR , twice to close the Waypoint List.
➤ To send the waypoint list on NMEA:
1. Display the waypoint list as previously described, then press the WAY-
WAYPOINT
TRANSFER
POINT TRANSFER soft key.
2. Press the soft key SEND WPT LIST ON NMEA .
The soft key changes to STOP SENDING WAYPOINTS .
The waypoint and route lists are transmitted from the chartplotter to other
instruments on NMEA.
USER CARD MENU
USER CARD NOT PRESENT
SAVE FAILED
NO OR INCORRECT CARD
ENSURE USER CARD IS CORRECTLY
INSERTED IN THE LOWER SLOT
LOAD WPT/ SAVE WPT/
RTE DATA RTE DATA
FROM CARD TO CARD
CHECK
CARD IN
USER SLOT
D5596-1
5-37