Yamaha YZFR1Y(C) 2009 Service Manual page 217

2. Lubricate:
• Inner tube's outer surface
Recommended oil
Suspension oil M1 or equiva-
lent
3. Tighten:
• Damper rod assembly
Damper rod assembly
75 Nm (7.5 m·kgf, 54 ft·lbf)
TIP
Tighten the damper rod assembly with the
damper rod holder "1".
Damper rod holder
90890-01506
YM-01506
4. Install:
• Dust seal "1"
New
• Oil seal clip "2" New
• Oil seal "3"
New
• Washer "4"
ECA14B1007
Make sure the numbered side of the oil seal
faces bottom side.
TIP
• Before installing the oil seal, lubricate its lips
with lithium-soap-based grease.
• Lubricate the outer surface of the inner tube
with fork oil.
• Before installing the oil seal, cover the top of
the front fork leg with a plastic bag to protect
the oil seal during installation.
5. Install:
• Outer tube
(to the inner tube)
6. Install:
• Washer
• Oil seal "1"
(with the fork seal driver "2")
Fork seal driver
90890-01442
Adjustable fork seal driver (36–
46 mm)
YM-01442
4-66
FRONT FORK