Gps Test - Furuno 1835 Operator's Manual

6.10

GPS Test

You can check the FURUNO GPS receiver GP-320B interfaced with this radar for cor-
rect operation as follows:
1. Press the MENU key to open the menu.
2. Use the Cursorpad (S or T) to select [GPS] and press the ENTER key.
3. Use the Cursorpad (S or T) to select [Self Test] and press the ENTER key. The
program no. and result of the test are shown, as OK or NG (No Good). When NG
appears, check the GPS receiver.
4. Press any key to close the test screen.
5. Press the MENU key to close the menu.
48502380XX
XX: Program version no. varies
according to equipment connected.
GPS-Self Test screen
6. MAINTENANCE, TROUBLESHOOTING
6-11