JVC GR-D90 Instructions Manual page 32

• Settings made in the "
effective only for tape playback.
BR I GH
ON SC
DA
T I M
RETURN
BRIGHT , DATE/TIME
Refer to " CAMERA DISPLAY" on page 30, 31.
The factory-preset of "DATE/TIME" in the "
DISPLAY" Menu is "OFF".
ON SCREEN
OFF: Camcorder's display (except the date, time and
time code) is not shown on LCD or connected TV.
[LCD]: Camcorder's display is shown only on LCD
and not on connected TV (except the date, time and
time code).
LCD/TV: Camcorder's display is shown on both LCD
and connected TV.
Playback Sound
During tape playback, the camcorder detects the sound
mode in which the recording was made, and plays the
sound back. Select the type of sound to accompany
your playback picture. According to the menu access
explanation on pg. 31, select "SOUND MODE" or
"12BIT MODE" from the Menu Screen and set it to the
desired parameter.
SOUND MODE
[STEREO ]: Sound is output on both "L" and "R"
channels in stereo.
SOUND L : Sound from the "L" channel is output.
SOUND R : Sound from the "R" channel is output.
12BIT MODE
MIX: Original and dubbed sounds are combined and
output in stereo on both "L" and "R" channels.
[SOUND 1]: Original sound is output on both "L" and
"R" channels in stereo.
SOUND 2: Dubbed sound is output on both "L" and
"R" channels in stereo.
[ ] = Factory-preset
EN
32
USING MENUS FOR DETAILED ADJUSTMENT
VIDEO DISPLAY
VIDEO DISPLAY" Menu are
I V DEO D I SPLAY
T
R E N E – LCD
TE / T I ME – O F F
E COD E – OF F
, TIME CODE
NOTES:
• For GR-D90/D70 Owners: You can also use the provided
remote control's AUDIO button
sound (without having to access the Playback Menu).
Make sure you point the remote control at the
camcorder's remote sensor
• The camcorder cannot detect the sound mode in which
the recording was made during fast-forward or rewind.
During playback the sound mode is displayed in the upper
left corner.
• The "SOUND MODE" setting is available for both
12-bit and 16-bit sound. (In previous models' functions,
"12-bit" is called "32 kHz" and "16-bit" is called "48 kHz".)
Display
VIDEO
12 b i t / SOU
L
12 : 34 : 24
T
to change the output
1
.
ND1 4 6
ON SCREEN setting:
For playback sound,
tape speed and tape
running.
DATE/TIME setting:
For date/time.
D E C 2 5 0 ' 3
5 3 : 0 P M
TIME CODE setting:
For time code.
Minutes
Seconds
Frames*
* 30 frames = 1 second