Dubbing Still Images Recorded On A Tape To A Memory Card; Setting Print Information (Dpof Setting) - JVC GR-D90 Instructions Manual

Dubbing Still Images Recorded On A
Tape To A Memory Card
Still images can be dubbed from a tape to a memory
card.
1
Load a memory card (
( pg. 9).
2
Set the VIDEO/DSC Switch
y
the Power Switch to "PLAY" while pressing down the
t
Lock Button .
3
Press the MENU/VOLUME wheel
Screen appears. Rotate it to select "
press it.
4
Rotate the MENU/VOLUME wheel
" COPY" and press it. The Sub Menu
appears. Rotate it to select "ON" and press it. Selection
is complete.
5
Rotate the MENU/VOLUME wheel
" RETURN" and press it twice. The normal playback
screen reappears.
6
To select a video image to be dubbed, start
playback by pressing 4/6
the image you wish to dub, press it again to engage
Still Playback.
7
To start dubbing, press SNAPSHOT
selected image is stored on the memory card.
• " " blinks during dubbing.
NOTES:
^
If SNAPSHOT is pressed in step 7 when a memory
card is not loaded, the message "COPYING FAILED" is
displayed.
To change the Snapshot mode for dubbing,
If an image recorded on the tape using the WIDE mode
( pg. 29) is dubbed to a memory card, the WIDE mode
identifying signal is not dubbed with it.
To use Playback Special Effects with a video image you
wish to dub, perform up to step 7 using the remote
control ( pg. 35).
Images are dubbed in 640 x 480 pixels.
I V DEO
COPY – OF F
ON
Menu Screen
pg. 11) and cassette
4
to "VIDEO", then set
%
in. The Menu
VIDEO" and
%
to select
%
to select
7
. At the moment you find
^
. The
pg. 25.
Display
4 4
Setting Print Information
This camcorder is compatible with the DPOF (Digital
Print Order Format) standard in order to support future
systems such as automatic printing, which records
information about the still images you wish to print
(such as the number of prints to make). There are 2
print information settings available: "TO PRINT ALL
STILL IMAGES (ONE PRINT FOR EACH)" explained
below and "TO PRINT BY SELECTING STILL IMAGES
AND NO. OF PRINTS".
TO PRINT ALL STILL IMAGES
(ONE PRINT FOR EACH)
1
Set the VIDEO/DSC switch
Power Switch
t
Lock Button
• A stored file is displayed.
2
Press the MENU/VOLUME wheel
Screen appears.
3
Rotate the MENU/VOLUME wheel
"DPOF" and press it. The Sub Menu appears.
4
Rotate the MENU/VOLUME wheel
"ALL 1" and press it. Selection is complete. The DPOF
Screen appears.
5
Rotate the MENU/VOLUME wheel
"EXECUTE" and press it. The normal playback screen
appears.
• To cancel selection, rotate the MENU/VOLUME wheel
%
to select "RETURN" and press it.
To Reset The Setting . . .
..... select "RESET" in step 4. The setting is reset to 0
for all still images.
TO PRINT BY SELECTING STILL IMAGES AND
NO. OF PRINTS
1
Perform steps 1 through 3 of "TO PRINT ALL STILL
IMAGES (ONE PRINT FOR EACH)".
2
Rotate the MENU/VOLUME wheel
6 6
"CURRENT" and press it. Selection is complete. The
DPOF Screen appears.
3
6
Press 2
print appears.
4
Rotate the MENU/VOLUME wheel
highlight bar to the SHEETS number indication and
press it.
(DPOF Setting)
4
to "DSC", then set the
y
to "PLAY", while pressing down the
located on the switch.
%
%
%
%
8
or 3 so that the image you wish to
%
Continued on next page.
ADVANCED FEATURES
(GR-D90 and GR-D70 only)
in. The Menu
%
to select
to select
to select
to select
to move the
EN
21