Getting Started 7; Loading A Memory Card (Gr-D90/D70 Only); Picture Quality/Image Size Setting (Gr-D90/D70 Only) - JVC GR-D90 Instructions Manual

Loading A Memory Card
(GR-D90/D70 only)
The provided memory card (GR-D90 only) is already
inserted in the camcorder when you receive the
camcorder.
1
Make sure the camcorder's power is off.
2
Open the LCD monitor (
Button), then open the card cover (MEMORY CARD)
p
.
3
Insert the memory card clipped edge first.
• Do not touch the terminal on the reverse side of the
label.
4
To close the card cover
click.
To Unload A Memory Card:
In step 3 push the memory card, which then comes out
of the camcorder automatically. Pull it out and close the
p
card cover .
Label
Memory card
NOTES:
Be sure to use only SD Memory Cards marked "
or MultiMediaCards marked "
Some brands of memory cards are not compatible with
this camcorder. Before purchasing a memory card ,
consult its manufacturer or dealer.
Before using a new memory card, it is necessary to
FORMAT the card. pg. 22.
ATTENTION
Do not insert/remove the memory card while the
camcorder is turned on, as this may cause the memory
card to be corrupted or cause the camcorder to
become unable to recognize whether or not the card is
installed.
u
pg. 47, Monitor Open
p
, push it until you hear a
u
p
Clipped edge
".
Picture Quality/Image Size Setting
(GR-D90/D70 only)
The Picture Quality/Image Size can be selected to best
match your needs. Refer to the chart on page 18 for
your selection.
1
Set the VIDEO/DSC Switch
the Power Switch
t
Lock Button located on the switch. The POWER/
r
CHARGE lamp
2
Press the MENU/VOLUME wheel
Screen appears.
3
Rotate the MENU/VOLUME wheel
" (DSC)" and press it.
4
Rotate the MENU/VOLUME wheel
"QUALITY" and press it. The Sub Menu appears.
Rotate the MENU/VOLUME wheel
desired mode and press it.
5
Rotate the MENU/VOLUME wheel
"IMAGE SIZE" and press it. The Sub Menu appears.
Rotate the MENU/VOLUME wheel
desired mode and press it.
6
Rotate the MENU/VOLUME wheel
" RETURN", and press it twice. The Menu Screen
closes.
%
r
"
NOTE:
In the 1024 x 768 mode, images are shot in 720 x 480
pixels and they are converted and stored in the 1024 x 768
file size.
4
to "DSC", then set
y
to " " while pressing down the
lights and the camcorder turns on.
%
in. The Menu
%
to select
%
to select
%
to select the
%
to select
%
to select the
%
to select
t y
Display
DSC
QUAL I TY – F I NE
I MAGE S I ZE – 1 02 4 X7 6 8
REC SELECT –
RETURN
GETTING STARTED
EN
11