Install Your Access Point - NETGEAR WAC120 Installation Manual

¾ To configure the LAN and wireless access settings:
1. Log in to the access point.
2. Select Configuration > IP > IP Settings.
3. Configure the IP settings for your LAN.
For more information about IP settings, see the reference
manual.
4. Click the Apply button.
Your settings are saved.
5. Select Configuration > Security > Profile Settings.
6. Configure a security profile for your wireless network.
For more information about security profile settings, see the
reference manual.
7. After configuring a security profile, click the Apply button.
8. Using a computer or another wireless device, verify that you
can establish a wireless connection to the access point.

Install Your Access Point

Make sure that your Internet service is active before you install
your access point.
¾ To install your access point:
1. Prepare your network.
2