NETGEAR WAC120 Installation Manual page 2

You can use these diagrams to connect your wireless access point or follow the detailed instructions in this booklet.
Modem
Access point
Ethernet cable
Access point
Network switch
1 2 3 4
Ethernet cable
Option 1
Internet
1. Configure your access point for your network.
For more information, see
2. Connect your modem to the Internet.
Ethernet cable
3. Connect your modem to the LAN port on the rear of the
access point.
Option 2
1. Configure your access point for your
Internet
2. Connect your modem to the Internet.
3. Connect your modem to a network switch.
4. Connect the access point to the same
Ethernet cable
Set Up the Access Point on page 1.
network.
For more information, see Set Up the Access
Point on page 1.
network switch.
Support
Thank you for selecting NETGEAR products. After installing your
device, locate the serial number on the label of your product and
use it to register your product at https://my.netgear.com. You must
register your product before you can use NETGEAR telephone support.
NETGEAR recommends registering your product through the NETGEAR
website.
To contact NETGEAR for support, visit
http://support.netgear.com/general/contact
1-888-NETGEAR. In other countries, visit
http://support.netgear.com/general/contact/default.aspx
numbers.
For product updates and web support, visit http://support.netgear.com.
NETGEAR recommends that you use only the official NETGEAR support
resources.
You can get the user manual online at
http://downloadcenter.netgear.com or through a link in the product's
user interface.
or call (US only)
for phone