8.1
Adjusting the armrests and the joystick box
The following information is valid for all seating systems.
CAUTION: Danger of the remote being pushed backwards during an accidental collision
with an obstacle, such as a doorframe or table, and the joystick being jammed against the
armpad if the position of the remote is adjusted and all screws are not completely
tightened! This will cause the mobility device to drive forward uncontrollably and
potentially injure the mobility device user and any person standing in the way!
• When adjusting the position of the remote, always make sure to tighten all screws securely!
• If this should accidentally happen, immediately switch the mobility device electronics OFF at
the remote!
8.1.1
Adjusting the joystick box to the length of the user's arm (all seats)
• Release wing bolt (1).
• Adjust the remote by pushing it forwards or
backwards to the required location.
• Retighten the screw.
41