Network; Wan - TP-Link Archer C8 User Manual

5.2

Network

Figure 5-2 the Network menu
There are three submenus under the Network menu as shown in Figure 5-2: WAN, MAC Clone
and LAN. Click any of them, and you will be able to configure the corresponding function.
5.2.1

WAN

Choose menu "Advanced→Network→WAN", you can configure the IP parameters of the WAN
on the screen below.
1. If your ISP provides the DHCP service, please choose Dynamic IP type, and the router will
automatically get IP parameters from your ISP. You can see the page, shown in Figure 5-3.
This page displays the WAN IP parameters assigned dynamically by your ISP, including IP
address, Subnet Mask, Default Gateway, etc. Click the Renew button to renew the IP
parameters from your ISP. Click the Release button to release the IP parameters.
Archer C8 AC1750 Wireless Dual Band Gigabit Router
Figure 5-3 WAN – Dynamic IP
- 26 -