TP-Link Archer C8 User Manual page 64

Wireless Password - You can enter ASCII characters between 8 and 63 characters or 8

to 64 Hexadecimal characters. The default password is the same with the default PIN
code, which is labeled on the bottom of the router or can be found in Figure 5-28.
Group Key Update Period - Specify the group key update interval in seconds. The

value should be 30 or above. Enter 0 to disable the update.
WPA/WPA2- Enterprise - It's based on Radius Server. If you choose WPA/WPA2 -

Enterprise, WPS function will be disabled.
Version - you can choose the version of the WPA security on the drop-down list. The

default setting is Automatic, which can select WPA (Wi-Fi Protected Access) or WPA2
(WPA version 2) automatically based on the wireless station's capability and request.
Encryption - You can select either Automatic, or TKIP or AES.


Note:
If you check the WPA/WPA2-Enterprise
find a notice in red as shown in Figure
Radius Server IP - Enter the IP address of the Radius server.

Radius Port - Enter the port number of the Radius server.

Radius Password - Enter the password for the Radius server.

Archer C8 AC1750 Wireless Dual Band Gigabit Router
Figure 5-31 WPA/WPA2 – Personal
radio button and choose TKIP encryption, you will
5-32.
Figure 5-32 WPA/WPA2 - Enterprise
- 53 -