TP-Link Archer C8 User Manual page 63

Disable Security - If you do not want to use wireless security, check this radio button. But it's

strongly recommended to choose one of the following modes to enable security.
WPA/WPA2-Personal - It's the WPA/WPA2 authentication type based on pre-shared

passphrase. The router is configured by this security type by default.
Version - You can choose the version of the WPA-PSK or WPA2-PSK security on the

drop-down list. The default setting is WPA2-PSK.
Encryption - You can select either TKIP or AES as Encryption. The default setting is AES.


Note:
If you check the
find a notice in red as shown in
Archer C8
Figure 5-30 Wireless Security
WPA/WPA2-Personal
Figure
AC1750 Wireless Dual Band Gigabit Router
radio button and choose TKIP encryption, you will
5-31.
- 52 -