Parrot MKi + CK3100 range 2008 Installation Manual page 7

5008
1
Make a hole in the cabin light
vanes.
3
Stick the bracket (supplied) to the
windscreen after thoroughly cleaning
the surface.
5
Run the cable replacing the seal
on the driver's side door.
This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is
solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All
rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and
Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually
Microphone feeding 1 / 2
Run the microphone cable inside and
towards the windscreen.
Using the plastic trim tools, run the
cable under the headliner and into
the windscreen post
on the driver's side.
Pass the cable into the dashboard
on the left side.
2
4
6