Network Filter - D-Link DIR-655 User Manual

Section 3 - Configuration
Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers, by their MAC addresses, from accessing the network.
You can either manually add a MAC address or select the MAC address from the list of clients that are currently connected to the router.
Select.Turn.MAC.Filtering.Off, Allow.MAC.addresses.listed.below, or Deny.
Configure MAC
MAC.addresses.listed.below from the drop-down menu.
Filtering:
MAC Address: Enter the MAC address you would like to filter.
To find the MAC address on a computer, please refer to the Networking Basics
section in this manual.
DHCP Client: Select a DHCP client from the drop-down menu and click << to copy that MAC
address.
Clear:
Click to remove the MAC address.
D-Link DIR-655 User Manual

Network Filter

59