Recording; Basic Recording - JVC GR DV 3 Instructions Manual

18
EN
You should already have performed the necessary preparations (
and try recording that way before attempting to use more advanced features.
NOTE:
Before starting recording, make sure you set the date and time (
recording, you can display them during playback (
Lock button
Power lamp
Power Dial
START/STOP button
1
SELECT OPERATION MODE
Set the Power Dial to " " while pressing down
the lock button located on the dial.
2
PULL OUT VIEWFINDER
Pull out the viewfinder fully.
•The lens cover opens, the power lamp comes
on and the scene you're aimed at appears.
• The Record-Standby mode is engaged.
3 START RECORDING
When "PAUSE" appears, press START/STOP. A
beep signals the start of recording and the tally
lamp comes on.
4 STOP RECORDING
Press START/STOP again to stop recording.
• The camcorder re-enters Record-Standby
mode.
Select
Dial
Tally lamp
Camera sensor

RECORDING

pg. 8 – 17). Set the Power Dial to " "
pg. 11). Even if they don't appear during
pg. 51).
IND.ON/OFF
button
5
END RECORDING
When you're finished recording, push back the
viewfinder; the lens cover closes and the
power lamp goes out.
•When transporting, make sure the viewfinder
is pushed back.
•To turn power on again, pull out the
viewfinder.
OR
Set the Power Dial to "OFF".
•When turning to "OFF", it is not necessary to
press down the lock button.

Basic Recording

Display
REC
PAUSE 444
During recording
PAUSE
Record-Standby